Suspension and Steering System – Chris Prince

Rear shock absorber top pin 3 litre models

Chris Prince — Tue, 04 Feb 2020 08:06:29 +0000

Original pattern top pin for mounting the rear shock absorber on all three litre models.

Power steering oil filter

Chris Prince — Fri, 14 Jun 2019 15:37:00 +0000

Oil filter element for cars fitted with original type hydraulic power steering, the elemnt is fitted inside the fluid reservoir and is accessed by removing the top of the reservoir

Splined hub front for drum braked cars TA/C21 and early TD21

Lyndon Darkes — Sat, 16 Feb 2019 18:05:50 +0000

Splined hub for wire wheels to fit cars fitted with drum brakes on the front. If converting from pressed steel wheels, the drums are different.
If you need just one hub, specify left or right.

kingpin thrust bearing

Lyndon Darkes — Sat, 16 Feb 2019 18:05:25 +0000

Thrust bearing which sits at the base of the kingpin and takes the weight of the car on the lower wishbone.

track rod end dust cover

Lyndon Darkes — Sat, 16 Feb 2019 18:05:23 +0000

Rubber dust cover or boot for the track rod end.
Two sizes are available:
Large 38mm diameter
Medium 30mm diameter
measuring the internal diameter of the larger end.
Come complete with spring clips.
Please specify size required when ordering, this depends on the actual track rod end fitted to the car and is not defined by the year or model.

lower front wishbone

Lyndon Darkes — Sat, 16 Feb 2019 18:05:17 +0000

Complete lower wishbone assembly, powder coated black. The original design has been modified so that the bottom plate can be unbolted and lowered down. This means the spring can be removed or fitted without removing the wishbone making this service operation a great deal safer.
The wishbones are handed and it is recommended that they are replaced as a pair because the new version is heavier than the original.
Price is for one wishbone only.

anti roll bar centre mounting

Lyndon Darkes — Sat, 16 Feb 2019 18:05:11 +0000

The centre bracket which bolts to the chassis upon which the anti roll bar pivots. Price is for one bracket.

TF rear spring plate (pair)

Lyndon Darkes — Sat, 16 Feb 2019 18:05:07 +0000

This is the mounting plate for the rear spring to axle and lower mounting for the shock absorber. The TF spring is wider than the other three litre ones, so if fitting the TF springs to an earlier car, a pair of these will be needed.
The shock absorber mounting is improved from the original design and now uses a threaded end to the pin and a nyloc nut. Sold as a pair.

Three litre rear spring (Exc TF21) per pair

Lyndon Darkes — Sat, 16 Feb 2019 18:05:06 +0000

Supplied in pairs, rear road spring for all three litre models except TF21 still fitted with the wider spring.

Lower wishbone inner pin end plate

Lyndon Darkes — Sat, 16 Feb 2019 18:04:49 +0000

The end plate which fits to the lower wishbone inner pin and can easily be damaged when the suspension is dismantled.